1/1
Swipe or click to see more
Select an option below to continue reading this premium story.
Already a Honolulu Star-Advertiser subscriber? Log in now to continue reading.
For more craft ideas, visit benfranklinhawaii.com.
POST-IT NOTES HOLDER
Supplies:
>> 4-by-6-inch bent acrylic frame*
>> 4-by-6-inch printed paper for backing
>> Cutout or photo smaller than 4-by-6 inches
>> 1 -1/2-by-2-inch Post-it note pad
>> 2 Glue Dots Pop Up Dots
>> 1 Aqua tube
>> 1/4-inch double-stick tape
>> Optional: 15 inches of sheer 5/8-inch ribbon
>> Pen
>> Note: You can use any size of bent acrylic frame, you’ll just need to adjust the size of the paper inserts and other embellishments.
Directions:
1. Take the cutout or photo and place on the 4-by-6-inch printed paper, vertically.
2. Next place a Post-it note on the printed paper below the cutout. Adjust placement as necessary. Remove the Post-it note and tape the cutout in place.
3. Lay the bent acrylic frame down so the bottom is at the top and the frame sits at an angle. Slide the printed paper with the cutout into the frame.
4. Tape the pad of Post-it notes onto the frame below the cutout.
5. Take the 2 Glue Dots and place on the bottom of the frame, left side as shown.
6. Adhere the Aqua tube to the glue dots. Place a pen inside for writing notes.
>> Optional: Tie a ribbon around the top for a finishing touch.